cruise_control_buttons_cmd_108.h

Go to the documentation of this file.

/******************************************************************************
 * Copyright 2018 The Apollo Authors. All Rights Reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *****************************************************************************/

#pragma once

#include "modules/canbus/proto/chassis_detail.pb.h"
#include "modules/drivers/canbus/can_comm/protocol_data.h"

namespace apollo {
namespace canbus {
namespace lexus {

class Cruisecontrolbuttonscmd108
    : public ::apollo::drivers::canbus::ProtocolData<
          ::apollo::canbus::ChassisDetail> {
 public:
  static const int32_t ID;

  Cruisecontrolbuttonscmd108();

  uint32_t GetPeriod() const override;

  void UpdateData(uint8_t* data) override;

  void Reset() override;

  // config detail: {'name': 'CRUISE_CONTROL_BUTTON', 'enum': {0:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_NONE', 1:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_CNCL', 2:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_ACC_FURTHER', 3:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_ACC_CLOSER', 4:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_SET_DEC', 5:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_RES_INC', 6:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_ON_OFF'}, 'precision': 1.0, 'len': 8,
  // 'is_signed_var': False, 'offset': 0.0, 'physical_range': '[0|255]', 'bit':
  // 15, 'type': 'enum', 'order': 'motorola', 'physical_unit': ''}
  Cruisecontrolbuttonscmd108* set_cruise_control_button(
      Cruise_control_buttons_cmd_108::Cruise_control_buttonType
          cruise_control_button);

  // config detail: {'name': 'IGNORE_OVERRIDES', 'offset': 0.0,
  // 'precision': 1.0, 'len': 1, 'is_signed_var': False, 'physical_range':
  // '[0|1]', 'bit': 1, 'type': 'bool', 'order': 'motorola', 'physical_unit':
  // ''}
  Cruisecontrolbuttonscmd108* set_ignore_overrides(bool ignore_overrides);

  // config detail: {'name': 'CLEAR_OVERRIDE', 'offset': 0.0, 'precision': 1.0,
  // 'len': 1, 'is_signed_var': False, 'physical_range': '[0|1]', 'bit': 2,
  // 'type': 'bool', 'order': 'motorola', 'physical_unit': ''}
  Cruisecontrolbuttonscmd108* set_clear_override(bool clear_override);

  // config detail: {'name': 'ENABLE', 'offset': 0.0, 'precision': 1.0, 'len':
  // 1, 'is_signed_var': False, 'physical_range': '[0|1]', 'bit': 0, 'type':
  // 'bool', 'order': 'motorola', 'physical_unit': ''}
  Cruisecontrolbuttonscmd108* set_enable(bool enable);

  // config detail: {'name': 'CLEAR_FAULTS', 'offset': 0.0, 'precision': 1.0,
  // 'len': 1, 'is_signed_var': False, 'physical_range': '[0|1]', 'bit': 3,
  // 'type': 'bool', 'order': 'motorola', 'physical_unit': ''}
  Cruisecontrolbuttonscmd108* set_clear_faults(bool clear_faults);

 private:
  // config detail: {'name': 'CRUISE_CONTROL_BUTTON', 'enum': {0:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_NONE', 1:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_CNCL', 2:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_ACC_FURTHER', 3:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_ACC_CLOSER', 4:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_SET_DEC', 5:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_RES_INC', 6:
  // 'CRUISE_CONTROL_BUTTON_CRUISE_CONTROL_ON_OFF'}, 'precision': 1.0, 'len': 8,
  // 'is_signed_var': False, 'offset': 0.0, 'physical_range': '[0|255]', 'bit':
  // 15, 'type': 'enum', 'order': 'motorola', 'physical_unit': ''}
  void set_p_cruise_control_button(
      uint8_t* data, Cruise_control_buttons_cmd_108::Cruise_control_buttonType
                         cruise_control_button);

  // config detail: {'name': 'IGNORE_OVERRIDES', 'offset': 0.0,
  // 'precision': 1.0, 'len': 1, 'is_signed_var': False, 'physical_range':
  // '[0|1]', 'bit': 1, 'type': 'bool', 'order': 'motorola', 'physical_unit':
  // ''}
  void set_p_ignore_overrides(uint8_t* data, bool ignore_overrides);

  // config detail: {'name': 'CLEAR_OVERRIDE', 'offset': 0.0, 'precision': 1.0,
  // 'len': 1, 'is_signed_var': False, 'physical_range': '[0|1]', 'bit': 2,
  // 'type': 'bool', 'order': 'motorola', 'physical_unit': ''}
  void set_p_clear_override(uint8_t* data, bool clear_override);

  // config detail: {'name': 'ENABLE', 'offset': 0.0, 'precision': 1.0, 'len':
  // 1, 'is_signed_var': False, 'physical_range': '[0|1]', 'bit': 0, 'type':
  // 'bool', 'order': 'motorola', 'physical_unit': ''}
  void set_p_enable(uint8_t* data, bool enable);

  // config detail: {'name': 'CLEAR_FAULTS', 'offset': 0.0, 'precision': 1.0,
  // 'len': 1, 'is_signed_var': False, 'physical_range': '[0|1]', 'bit': 3,
  // 'type': 'bool', 'order': 'motorola', 'physical_unit': ''}
  void set_p_clear_faults(uint8_t* data, bool clear_faults);

 private:
  Cruise_control_buttons_cmd_108::Cruise_control_buttonType
      cruise_control_button_;
  bool ignore_overrides_;
  bool clear_override_;
  bool enable_;
  bool clear_faults_;
};

}  // namespace lexus
}  // namespace canbus
}  // namespace apollo